WebHits - Parameters

Parameters

Listing of all available parameters. Modify the look and feel of your counter and make it match the layout of your page!

All parameters can be separated by & or |. See some examples too!

Parameter Description Default

display=X Specifies what to display
A valid string can be specified with display= parameter to display counter, clock or date. The valid value for the string parameter X is counter, clock or date. To display a counter, this parameter is not need as counter is the default display type display=counter

timezone=X Display time/date of the specified timezone
The parameter timezone= is only significant with display=clock or display=date. Use this parameter if you want to display time or date of another timezone. The timezone must be specified with a negative or positive four digit offset from GMT, for example: timezone=GMT-0500 or timezone=GMT+0530.
If the clock displays your local time wrong, specify your timezone with that parameter in order to display the correct time
None

tformat=X Time format in 12 or 24 hour
This parameter can be used to display time in 12 or 24 hour format. The valid values for the parameter X are 12 or 24 tformat=12

dformat=X Specifies date format
This parameter is only significant with display=date. The valid value for the string parameter X is any combination of MMDDYY (Month-Day-Year). For example: dformat=ddmmyy or dformat=YYMMDD dformat=MMDDYY

ignore= X.X.X.X Ignore IP address
You can ignore hits from the specified address using this parameter None

ft=X Frame Thickness
You can wrap the counter in an ornamental frame of X pixels thick. Use 0 for no frame. Values over 5 make a nice 3-D effect. ft=6

frgb=R;G;B Frame Color
Specifies the color of the frame in RGB (red/green/blue) format. Each color component, R, G, and B is specified as a value between 0 and 256. If you use ft= without a frgb= param, the default color is used.
If you specify a frgb= without a ft=, then the frame thickness defaults to 5. The color can be specified as hex string or as a RGB value. Do not use a # before the hex string! For example, if you want to specify white in hex, use frgb=FFFFFF
frgb=100;139;216
or
frgb=648BD8

tr=B Transparency On/Off
You can specify if your counter image will have a transparent color with the Boolean B. So tr=Y means there will be a transparent color. You must specify explicitly which color to make transparent. If you specify a trgb=, then you do not need to specify tr=Y. If you specify tr=Y and do not specify trgb=, then the default color black will be transparent. The valid values for B are Y, N, T, F, 1 or 0 tr=F
(no transparency)

md=X Max Digits
Defines maximum number of digits to display. Any value between 5 and 10 inclusive are permitted. Padding with leading zeros is automatically done for you; longer counts are truncated to the given X md=6
(and no padding)

pad=B Padding with 0's
Turn padding on/off in conjunction with md= setting. Valid values for the Boolean parameter B are Y, N, T, F, 1 or 0 pad=N
(without specification of a
md= value)
pad=Y
(with specification of a
md= value)

dd=X Typeface
Specifies the typeface used to display the digits. dd=A
(green led digits)

comma=B Display comma after every 3rd digit from right
The boolean value of parameter comma specifies whether to display comma after every 3rd digit from right. If you use this parameter as true, the left padding with zeros will be turned off. comma=F

srgb=R;G;B prgb=R;G;B Change a color of the image to a target color
Any one color of the image can be changed to a different color on the fly. srgb stands for source color, that is the color to change. prgb stands for pen color, that is the target color. The values for srgb and prgb can be colon separated color components (e.g, srgb=255;0;0) or hex values (e.g. srgb=ff0000)

chcolor=B Change a color of the image
This parameter is usually used to change the default green color to cyan. That is if you specify chcolor=T, and you want to change green to cyan, then you do not need to specify srgb and prgb parameters. chcolor=F

sh=B Show digits
Used to turn display of digits on or off according to the Boolean B. When sh=T, counter will be displayed and incremented, this is the default behavior.
If sh=F no digits will show, but the counter will still increment; instead of digits a transparent 1x1 GIF is displayed.
sh=T

df=ID.dat Specify your counter ID
Use the counter ID given to you after application for a counter df=random
(if not specified)

incr=B Increment Count
Makes it possible to display the current count without incrementing the count. This can be used to examine the count for reporting or other purposes without adding to the count. incr=T

negate=B Negate the color
Makes it possible to negate the color of the counter digits. Note that the frame is exempted from negating. negate=F

degrees=X Rotate X degrees
Makes it possible to rotate the counter image X degree. The possible values of X are 90, 180, 270 and 360. Note that 360 is meaningless as the counter will come back to the original 0 degree degrees=270
(only if rotate=Y)

rotate=B Rotate On/Off
The Boolean value B turns on or off rotating. If you use degrees= setting, rotate= is not needed rotate=F

Parameter	Description	Default
`display=X`	Specifies what to display A valid string can be specified with `display=` parameter to display counter, clock or date. The valid value for the string parameter `X` is `counter`, `clock` or `date`. To display a counter, this parameter is not need as `counter` is the default display type	`display=counter`
`timezone=X`	Display time/date of the specified timezone The parameter `timezone=` is only significant with `display=clock` or `display=date`. Use this parameter if you want to display time or date of another timezone. The timezone must be specified with a negative or positive four digit offset from GMT, for example: `timezone=GMT-0500` or `timezone=GMT+0530`. If the clock displays your local time wrong, specify your timezone with that parameter in order to display the correct time	None
`tformat=X`	Time format in 12 or 24 hour This parameter can be used to display time in 12 or 24 hour format. The valid values for the parameter `X` are `12` or `24`	`tformat=12`
`dformat=X`	Specifies date format This parameter is only significant with `display=date`. The valid value for the string parameter `X` is any combination of `MMDDYY` (Month-Day-Year). For example: `dformat=ddmmyy` or `dformat=YYMMDD`	`dformat=MMDDYY`
`ignore= X.X.X.X`	Ignore IP address You can ignore hits from the specified address using this parameter	None
`ft=X`	Frame Thickness You can wrap the counter in an ornamental frame of `X` pixels thick. Use `0` for no frame. Values over `5` make a nice 3-D effect.	`ft=6`
`frgb=R;G;B`	Frame Color Specifies the color of the frame in RGB (red/green/blue) format. Each color component, R, G, and B is specified as a value between `0` and `256`. If you use `ft=` without a `frgb=` param, the default color is used. If you specify a `frgb=` without a `ft=`, then the frame thickness defaults to `5`. The color can be specified as hex string or as a RGB value. Do not use a `#` before the hex string! For example, if you want to specify white in hex, use `frgb=FFFFFF`	`frgb=100;139;216` or `frgb=648BD8`
`tr=B`	Transparency On/Off You can specify if your counter image will have a transparent color with the Boolean `B`. So `tr=Y` means there will be a transparent color. You must specify explicitly which color to make transparent. If you specify a `trgb=`, then you do not need to specify `tr=Y`. If you specify `tr=Y` and do not specify `trgb=`, then the default color black will be transparent. The valid values for `B` are `Y`, `N`, `T`, `F`, `1` or `0`	`tr=F` (no transparency)
`md=X`	Max Digits Defines maximum number of digits to display. Any value between `5` and `10` inclusive are permitted. Padding with leading zeros is automatically done for you; longer counts are truncated to the given `X`	`md=6` (and no padding)
`pad=B`	Padding with 0's Turn padding on/off in conjunction with `md=` setting. Valid values for the Boolean parameter `B` are `Y`, `N`, `T`, `F`, `1` or `0`	`pad=N` (without specification of a `md=` value) `pad=Y` (with specification of a `md=` value)
`dd=X`	Typeface Specifies the typeface used to display the digits.	`dd=A` (green led digits)
`comma=B`	Display comma after every 3rd digit from right The boolean value of parameter `comma` specifies whether to display comma after every 3rd digit from right. If you use this parameter as true, the left padding with zeros will be turned off.	`comma=F`
`srgb=R;G;B prgb=R;G;B`	Change a color of the image to a target color Any one color of the image can be changed to a different color on the fly. `srgb` stands for source color, that is the color to change. `prgb` stands for pen color, that is the target color. The values for `srgb` and `prgb` can be colon separated color components (e.g, `srgb=255;0;0`) or hex values (e.g. `srgb=ff0000`)
`chcolor=B`	Change a color of the image This parameter is usually used to change the default green color to cyan. That is if you specify `chcolor=T`, and you want to change green to cyan, then you do not need to specify `srgb` and `prgb` parameters.	`chcolor=F`
`sh=B`	Show digits Used to turn display of digits on or off according to the Boolean `B`. When `sh=T`, counter will be displayed and incremented, this is the default behavior. If `sh=F` no digits will show, but the counter will still increment; instead of digits a transparent 1x1 GIF is displayed.	`sh=T`
`df=ID.dat`	Specify your counter ID Use the counter ID given to you after application for a counter	`df=random` (if not specified)
`incr=B`	Increment Count Makes it possible to display the current count without incrementing the count. This can be used to examine the count for reporting or other purposes without adding to the count.	`incr=T`
`negate=B`	Negate the color Makes it possible to negate the color of the counter digits. Note that the frame is exempted from negating.	`negate=F`
`degrees=X`	Rotate X degrees Makes it possible to rotate the counter image `X` degree. The possible values of `X` are `90`, `180`, `270` and `360`. Note that `360` is meaningless as the counter will come back to the original 0 degree	`degrees=270` (only if `rotate=Y`)
`rotate=B`	Rotate On/Off The Boolean value `B` turns on or off rotating. If you use `degrees=` setting, `rotate=` is not needed	`rotate=F`